Skip to product information
1 of 7

MW Gears and Gadgets

Volty Swith for Leatherman / Standalone - Smallest Multitester / Multimeter

Volty Swith for Leatherman / Standalone - Smallest Multitester / Multimeter

Regular price ₱2,749.00 PHP
Regular price ₱2,749.00 PHP Sale price ₱2,749.00 PHP
Sale Sold out
Shipping calculated at checkout.
Volty Switch: a keychain multimeter. It is modeled after Leatherman's bit inserts. Put one on your keychain or click it into your Leatherman for instant readings.

DC Meter up to 30V
AC Meter up to 24V
Car / Motorcycle Mechanic's Dream EDC.
Continuity Tester
EMF Detector (NCV / Spark Plug Pulse)
Hard gold surface finish.
Electronics encapsulated in epoxy.
Onboard Rechargeable Battery
Auto switching between modes: AC/DC/TEMP/CONTINUITY/EMF

Low Voltage DC Tester (1V - 30VDC RANGE, CAR, MOTORCYCLE, ):

Test: AA, AAA, C, D, 9V, Coin Cells, 4.2V Lithium, 12V or 24V DC Lead Acid Systems
0.1V measurement resolution
Reverse polarity protection up to 30V DC
Green Blinks = 10V/ea.
Yellow Blinks = 1V/ea.
Red Blinks = 0.1V/ea.

Low Voltage AC Tester (5-24VAC):

Auto Switching between AC and DC.
Testing AC sources above 24VAC is dangerous and can lead to electric shock and will permanently damage volty switch!
Accuracy +/- 1VAC
Used primarily in HVAC, CCTV Security, Access Control and More!

HVAC temperatures in both C and F:

Stores and displays the highest or lowest temperature reading since boot.
Temperature Reading Range: 0F - 140F (-18C - 60C)
Can be calibrated in 1 degree increments but don’t expect perfect readings across the entire testing range.

HVAC temperatures in both C and F:

Stores and displays the highest or lowest temperature reading since boot.
Temperature Reading Range: 0F - 140F (-18C - 60C)
Can be calibrated in 1 degree increments but don’t expect perfect readings across the entire testing range.

Rechargeable Onboard Battery:

100% DOD Tolerant.
To keep your onboard battery in good condition, please charge it at least once per year.
The switch on the back physically disconnects the battery to prevent self discharge.
Volty should be powered off and stored properly after taking readings to extend the working life of the onboard battery.
Recharge the battery by turning the switch on and connecting any 3-18V DC source and wait 2 hours before disconnecting.
Leatherman Compatibility:

We are shipping volty with an "untrimmed" shank. We made volty slightly larger than it needs to be due to manufacturing tolerances in printed circuit boards. You will need to trim one of the 4 edges of volty's shank with a file or knife edge to get a proper fit that "clicks" into a leatherman bit holder. So far we have confirmed compatibility with the following models:

Leatherman Signal
Leatherman Wave
Leatherman Charge
Leatherman Skeletool (Won't articulate, but still good for testing larger batteries).
Leatherman Surge
Leatherman Bit Extender

View full details